Nokia Mobile Hack Codes

Here Are Some codes that might help you. All codes are not 100% guarantee that it'll work, But almost all of 'em will work.


1. Imagine ur cell battery is very low, u r expecting an important call and u don’t have a charger.

Nokia instrument comes with a reserve battery. To activate, key is “*3370#”

Ur cell will restart with this reserve and ur instrument will show a 50% increase in battery.

This reserve will get charged when u charge ur cell next time.

*3370# Activate Enhanced Full Rate Codec (EFR)-Your phone uses the best sound quality but talk time is reduced by approx 5%
#3370# Deactivate Enhanced Full Rate Codec( EFR)
*#4720# Activate Half Rate Codec – Your phone uses a lower quality sound but you should gain approx 30% more Talk Time
*#4720# Deactivate Half Rate Codec

2. *#0000# Displays your phones software version,

1st Line : Software Version,
2nd Line : Software Release Date,
3rd Line : Compression Type
3. *#9999# Phones software version if *#0000# does not work.

4. *#06# For checking the International Mobile Equipment Identity (IMEI Number).

5. #pw+1234567890+1# Provider Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).

6. #pw+1234567890+2# Network Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).

7. #pw+1234567890+3# Country Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).

8. #pw+1234567890+4# SIM Card Lock Status.(use the “*” button to obtain the “p,w” and “+” symbols).

9. *#147# (vodafone) this lets you know who called you last *#1471# Last call (Only vodofone).

10. *#21# Allows you to check the number that “All Calls” are diverted to.

11. *#2640# Displays security code in use.

12. *#30# Lets you see the private number.

13. *#43# Allows you to check the “Call Waiting” status of your phone.

14. *#61# Allows you to check the number that “On No Reply” calls are diverted to.

15. *#62# Allows you to check the number that “Divert If Unreachable(no service)” calls are diverted to.

16. *#67# Allows you to check the number that “On Busy Calls” are diverted to.

17. *#67705646# removes operator logo on 3310 & 3330

18. *#73# Reset phone timers and game scores

19. *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible

20. *#7760# Manufactures code

21. *#7780# Restore factory settings

22. *#8110# Software version for the nokia 8110

23. *#92702689# (to remember *#WARRANTY#)

Displays -
1. Serial Number,
2.Date Made
3.Purchase Date,
4.Date of last repair (0000 for no repairs),
5.Transfer User Data.
To exit this mode -you need to switch your phone off then on again

24. *#94870345123456789# Deactivate the PWM-Mem

25. **21*number# Turn on “All Calls” diverting to the phone number entered

26. **61*number# Turn on “No Reply” diverting to the phone number entered

27. **67*number# Turn on “On Busy” diverting to the phone number entered

Each command is prefixed with either one or two * or # characters as follows:
** Register and Activate
* Activate 
## De-Register (and Deactivate)
# Deactivate
*# Check Status
© Call button

Once each command has been entered, if it is a network command (as opposed to a local handset command) it must be transmitted to the network by pressing the YES (receiver) key which acts as an enter key – this is represented here with the © character. Always enter numbers in full international format +CountryAreaNumber ( e.g. +447712345678).

Security
Change call barring code **03*OldCode*NewCode*NewCode#©
Change call barring code **03*330*OldCode*NewCode*NewCode#©
Change PIN code **04*OldPIN*NewPIN*NewPIN#©
Change PIN2 code **042*OldPIN2*NewPIN2*NewPIN2#©
Unlock PIN code (when PIN is entered wrong 3 times) **05*PUK*NewPIN*NewPIN#©
Unlock PIN2 code (when PIN2 is entered wrong 3 times) **052*PUK2*NewPIN2*NewPIN2#©
Display IMEI *#06#

Call Forwarding (Diversions)
De-register all call diversions ##002#©
Set all configured call diversions to number and activate **004*number#©
De-register all configured call diversions (no answer, not reachable, busy) ##004#©
Unconditionally divert all calls to number and activate **21*number#©
Activate unconditionally divert all calls *21#©
De-register unconditionally divert all calls ##21#©
Deactivate unconditionally divert all calls #21#©
Check status of unconditionally divert all calls *#21#©
Divert on no answer to number and activate **61*number#©
Activate divert on no answer *61#©
De-register divert on no answer ##61#©
Deactivate divert on no answer #61#©
Check status of divert on no answer *#61#©
Divert on not reachable to number and activate **62*number#©
Activate divert on not reachable *62#©
De-register divert on not reachable ##62#©
Deactivate divert on not reachable #62#©
Check status of divert on not reachable *#62#©
Divert on busy to number and activate **67*number#©
Activate divert on busy *67#©
De-register divert on busy ##67#©
Deactivate divert on busy #67#©
Check status of divert on busy *#67#©
Change number of seconds of ringing for the given service before diverting a call (such as on no answer). Seconds must be a value from 5 to 30. De-registering the same divert will also delete this change! **service*number**seconds#© (Service numbers, see below)

Call barring
Activate barring all outgoing calls (see Security to set code) **33*code#©
Deactivate barring all outgoing calls #33*code#©
Check status of barring all outgoing calls *#33#©
Activate barring all calls **330*code#©
Deactivate barring all calls #330*code#©
Check status of barring all calls *#330*code#©
Activate barring all outgoing international calls **331*code#©
Deactivate barring all outgoing international calls #331*code#©
Check status of barring all outgoing international calls *#331#©
Activate barring all outgoing international calls except to home country **332*code#©
Deactivate barring all outgoing international calls except to home country #332*code#©
Check status of barring all outgoing international calls except to home country *#332#©
Activate barring all outgoing calls **333*code#©
Deactivate barring all outgoing calls #333*code#©
Check status of barring all outgoing calls *#333#©
Activate barring all incoming calls **35*code#©
Deactivate barring all incoming calls #35*code#©
Check status of barring all incoming calls *#35#©
Activate barring all incoming calls when roaming **351*code#©
Deactivate barring all incoming calls when roaming #351*code#©
Check status of barring all incoming calls when roaming *#351#©
Activate barring all incoming calls **353*code#©
Deactivate barring all incoming calls #353*code#©
Check status of barring all incoming calls *#353#©

Call waiting
Activate call waiting *43*#©
Deactivate call waiting #43##©
Check status of call waiting *#43#©

Calling Line Identification
The following only works if CLIP and CLIR are enabled (ask your service provider)
CLIP: Presentation of the number of the incoming call
Activate CLIP **30#©
Deactivate CLIP ##30#©
Check status of CLIP *#30#©
CLIR: Presentation of one’s own number to the to the called party
Activate CLIR **31#©
Activate CLIR for the actual call *31#number©
Deactivate CLIR ##31#©
Deactivate CLIR for the actual call #31#number©
Check status of CLIR *#31#©

COLP: Presentation of the actual number reached (if number called was diverted to another number
Activate COLP *76#©
Deactivate COLP #76#©
Check status of COLP *#76#©
COLR: Presentation of the original number called by the calling party (if the call was diverted to this cellphone)
Activate COLR *77#©
Deactivate COLR #77#©
Check status of COLR *#77#©

Hacking Facebook Using Your Android

Hi everyone! This is a guide for some Awesome Android Hacking Tools! A lot of people may not be aware but there are some great tools for network hacking on your mobile device.

NOTE: YOU NEED ROOT FOR THESE APPS!!



1) Network Spoofer:
This tool allows you to redirect all traffic on a wifi network to any site you want them to go to! You can also manipulate how people see images etc! So cool! Here is the full TUT and Video on this Tool! Click Here.

2) Piik Network Image Spy:

This tool allows you to view all images being viewed on a network! This is great for people who want to spy on what people are looking at on the network! Full Tutorial + Link, Here. 

3) Mac Address Spoofing:


This app lets you change your wifi Mac Address. You can download this App Here.

4) Network Mapper:

This tool lets you scan a network for live hosts and check for open ports. You can Download this App here.

Packet Sniffing (Non-Intrusive) :

5) Shark for Root & Shark Reader - Shark is a popular port (or simular) to WireShark (Based of TCPDUMP). It lets you log network traffic and analyze it on your device!

This is the logger: Link.

This is to read the logs: Link.

Now time for the GOOD STUFF!!!

Below are some of the best hacking apps for android. Real hacking apps! In my opinion these are a lot more effective than most Linux apps!

Session Hijackers:

6) Faceniff - Pwning Facebook was never so easy! This is by far one of my favorite apps! Faceniff is a Session Hijacker like Firesheep or hamster/ferret but BETTER. No more need to use cain and able and firesheep to hijack. Also who would suspect a cell phone as a hacking tool?  Faceniff will sniff the network and display active sessions and Hijack them! It can hijack the following - 
FaceBook
Twitter
Youtube
Amazon
VKontakte
Tumblr
MySpace
Tuenti
MeinVZ/StudiVZ
blogger
Nasza-Klasa

It is a paid app but here is a cracked versions. just install and enter any activation code and bam! Download here.


7) Droid Sheep - Droid sheep does the same as above and the author is working on SSL Stripping as well! I personally prefer this over Faceniff! Get it here.

Finally the ULTIMATE android hacking tool and a special treat for you guys as it is still in beta I am going to leak the APK here! 

 8) ANTI - AKA: Android Network Tool Kit. Anti can do a LOT! Here is the description from the website: 

[+] Scan - This will scan the selected target for open ports and vulnerabilities, also allowing the user to select a specific scanning script for a more advanced/targeted scan.

[+] Spy - This will 'sniff' images transferred to/from the selected device and display them on your phone in a nice gallery layout. If you choose a network subnet/range as target, then all images transferred on that network - for all connected devices - will be shown. Another feature of the Spy plugin is to sniff URLs (web sites) and non-secured (ie, not HTTPS) username/passwords logins, shown on the bottom drawer.

[+] D.O.S - This will cause a Denial Of Service (D.O.S) for the selected target, ie. it will deny them any further access to the internet until you exit the attack.

[+] Replace images - This will replace all images transferred to/from the target with an Anti logo, thus preventing from attacked used seeing any images on their browsers while the browse the internet, except for a nice looking Anti logo...

[+] M.I.T.M - The Man In The Middle attack (M.I.T.M) is an advanced attack used mainly in combination with other attack. It allows invoking specific filters to manipulate the network data. Users can also add their own mitm filters to create more mitm attacks.

[+] Attack - This will initiate a vulnerability attack using our Cloud service against a specific target. Once executed successfully, it will allow the attack to control the device remotely from your phone.

[+] Report - This will generate a vulnerability report with findings, recommendations and tips on how to fix found vulnerabilities or bad practices used.

Anti supports & uses the followings OSS tools :
nmap
Ettercap
driftnet
THC-Hydra
Metasploit
We will be releasing patch sets for OSS shortly. This should assist developers to compile binaries used by Anti! 

REVIEW:

Anti Can Steal SSL Encrypted logins (GMAIL ETC), Anti uses driftnet to spy on images a slave computer is viewing, Anti Can Brute Force passwords and even remote exploit a computer using metasploit! Anti also uses nmap to map targets and uses OS Detection! Not to mention anti has the ability to DOS a network. The only downside is that if you want to use a Metasploit hackable computer you need to buy credits however everything else works! I hosted so it stays live.

Here is the leak of my beta apk. Download it Here.

Finally I have one more cool apk! 

9) WifiKill: This is a simple Denial Of Service App. It will let you either completely freeze a users Internet access or DOS the whole network! Here is the app (Also Unreleased Beta) : Download Here.

Hope you Enjoy these Appz. :)

Rooting Samsung Galaxy S2 GT-I9100

Samsung just recently rolled out to the Samsung Galaxy S2 GT-I9100 a new Ice Cream Sandwich update known to the community as the XWLPD build. For those of you who have just flashed the recent firmware, you may already know that flashing official ROMs such as the XWLPD firmware will mean losing your root privileges.

Luckily for Galaxy S2 owners, XDA Developers member Chainfire has already made an exploit that will allow you to root your phone, as well as install ClockworkMod Recovery using the CF-Root Kernel. The kernel is fully stock and is primarily based on the original firmware, with some added features. The CF-Root Kernel has root access, BusyBox 1.16.2, and ClockworkMod Recovery.

Learn more about rooting and installing this modified kernel by checking our step-by-step guide below.

Warning

• The instructions in this guide are intended for use with the Samsung Galaxy S2, model number GT-I9100. Applying these instructions on another device or model may produce undesired outcomes.
• The information in this guide is provided for instructional and educational purposes only. There is no guarantee that these instructions will work under your specific and unique circumstances.
• Use these instructions at your own risk. We shall not hold any responsibility or liability for whatever happens to you or your device arising from your use of the info in this guide.
• Read and understand the whole guide first before actually performing the instructions.

Requirements

• Samsung Galaxy S2 GT-I9100 running stock Android 4.0.3 ICS build XWLPD
  • If you have not updated yet, check our guide on how to upgrade your Galaxy S2 to firmware XWLPD.
• A Windows PC
• Samsung USB device drivers for the Galaxy S2 installed on your PC. You can use Samsung KIES to obtain the drivers.
• Temporarily disable Samsung KIES, anti-virus tools, and firewall programs as they are known to interrupt the installation process.
• Enable USB Debugging on your phone. You can do this by heading to Settings > Developer Options > USB Debugging. Make sure that there is a check mark beside that option.
• Backup all personal data on your phone to make sure you have a copy of your personal data (e.g., contacts, SMS, MMS, Internet settings, Wi-Fi passwords, and the like) in case the procedure in this guide erases such data.
• • For backup tips, check our guides on how to sync your data to the cloud and how to create local backups of your mobile data.

Instructions

1. Download the CF-Root Kernel (CF-Root-SGS2_XX_NEE_LPD-v5.4-CWM5.zip, 6.2 MB) package to your computer.
2. Download Odin3 1.85 (Odin 1.85.zip, 200 kB) to your computer.
3. Extract the downloaded CF-Root Kernel ZIP file using any extracting software such as WinZIP or 7-Zip. Place the extracted file inside a single folder. Important! Do not extract the TAR file.
4. Extract Odin 1.85.zip and place the contents inside a single folder.
5. On your PC, launch the Odin3 application by double-clicking Odin3 v1.85.exe.
6. Switch off your Samsung Galaxy S2.
7. Boot your phone into Download Mode. You can do this by pressing and holding down the Volume Down, Home, and Power keys together until you are greeted with a Warning!screen. Press the Volume Up key to enter Download Mode.
8. Connect your Galaxy S2 to your PC via USB cable. You should see a message “Added!” under Odin’s message box found on the bottom-left of the application. This should indicate that your phone’s USB drivers have been installed.
9. In Odin3, click the PDA button, then browse for the CF-Root-SGS2_XX_NEE_LPD-v5.4-CWM5.tar file. Make sure that Repartition is not checked.
10. Important! Do not make any changes in Odin aside from the one’s mentioned in this tutorial. Doing so may cause irreversible damage to your device.
11. Select the Start button in Odin to begin flashing the CF-Root Kernel on your Galaxy S2.
12. Once the firmware has been installed, your phone should automatically reboot. A “PASS” message with a green background will be shown on the top-leftmost box of Odin.
13. Disconnect your phone from your PC once you see the Samsung logo.

Congratulations! You have successfully rooted your Samsung Galaxy S2 GT-I9100 using Odin3. Enjoy the benefits of having a rooted device.

Customizing Your Android Phone

Today I'm going to show you how to customize your android phone. So basically I like android because it's so customizable. You can install different launchers, themes, and different widgets.

Let's start with launchers. In Google Play (former Market), there is lots of different launchers. I'm going to show you my top 5 Recommended launchers.

1. Go Launcher EX (Free)
Go Launcher EX is one of the most popular launchers in Google Play. I love it because it's so customizable. Go Launcher EX has so many widgets as GO Locker, GO TaskManager, GO Calendar, GO Clock etc. In Google Play there is hundreds of themes for GO Launcher and for GO Widgets as well.

2. SPB Shell 3D ( about $10 in Google Play)
This is awesome! Turn you android experience into 3D! It's fast and stable. It has many homescreens ready and they are useful and make easier to use your phone. I recommend to buy it. I promise it's not waste of money.

3. LauncherPro (Free, except LauncherPro Plus unlock key.)
I like LauncherPro because it's simple, fast and light launcher. It has own widgets but they are only available if you buy LauncherPro Plus Unlock key. There is different themes for the widgets in Google Play. It's free so try it, you have nothing to lose. And it has cool 3D app drawer :)

4. Holo Launcher (Free, except Holo Launcher Plus)
Get Android 4.0 feeling to your android now. It's free and fast. I like Holo Launcher because it's really simple. It doesn't require any cool themes or anything. It's perfect as the way it is. Try that too. Again it's free so you don't have anything to lose.

5. ADW Launcher EX (About $3 in Google Play)
OMG It's not free?! Don't worry there is free version available called ADW Launcher. So if you don't want to buy anything you can download free version. So basically I like ADW Launcher because it has many themes, it has different options to customize it example different app drawers.

Okay. So now have some information about different launchers. Let's get into different Lockscreens. Again I'm going to show you my top 3 Recommended lockscreens.

1. WidgetLocker (Not free)
Okay so WidgetLocker is awesome! As the name says you can add different widgets to your lockscreen. It has different lockscreen styles example Iphone, Honeycomb, ICS and many more. You can also download more theme from XDA and WidgetLocker website.

2. GO Locker (Free)
This is only available if you have GO Launcher EX installed. This is must have app if you have GO Launcher EX Installed. For this lockscreen there is sooo many themes that it's hard to choose. It's very stable and it doesn't have high battery usage. I never had any problem with this lockcreen. Give it a try. 

3. MagicLocker (Free)
This again basic lockscreen app and it doesn't require any big introduction. So it has many many themes in Google Play and you can modify your lockscreen by enabling or disabling clock or date but otherwise it's very simple.

Now you know some cool lockcreens and next step is wigets. This time I'm not going to show my top 5 and I just tell you some cool widgets I know. Some of these are free and some aren't. Some coolest widgets are: HD Widgets (Just some clock widgets etc.), Beautiful Widgets (Basically clock/weather widget), Weather (So you can see weather). I like all those and there is many more but I'm not going to introduce you those.

Now when we are close to end I'm going to tell you about system themes. Basically system themes comes with custom roms, but you can download them from internet. In Google Play there is themes for CM9 and CM7. But you can dowload themes from internet and they are usually .ZIP files so you need to flash them via CWM. 


This Tutorial is from Luzmo. ( HF )
To View This Tutorial in HF, Click Here.

Rooting Almost Any Android Phone

This is a Tutorial on Rooting Android Phones with the help of a software called SuperOneClick.

1) Click Here to download the software.

2) Now extract the file into your desktop.

3) Put your Phone in USB debugging Mode.

(Settings --> Applications --> Development --> USB Debugging.)

4) Open the SuperOneClick Application.

5) Plug your Phone to your Computer.

6) Click Root in the Application.

7) It takes some time, be patient.

8) When It's done you should get this:

9) Click No for Root Test.

10) Now Reboot your phone if it didn't get Rebooted Automatically.

11) When Rebooting is over, Download Root Checker from Google Play from here.

12) Now run it and Click Verify Root Access. Click Allow when asked for Permission.

13) Now it will show : Congratulations! This Device has root access!.

14) Now your phone has been Rooted Successfully.

Note:

This Method Doesn't work on All Android phones, but it works on Almost of them.

Try this Method at your Own Risk.

Increasing Your Internet Speed

Today I'm here to share my new found knowledge on how to increase your internet speed.

This is basically to work on your DNS servers.

We are going to change your DNS server, by comparing which is the fastest. And for this we are going to download a free program which will help us in selecting the best DNS servers for you specifically.

Follow the following Steps :

1) Download the DNS Benchmarking Tool from Here.

2) Once Downloaded. You have to Run it as Admin.

3) Now follow the Instructions (Taken from the Website ):

 

4) When you're done running it, It will ask you if you want to build your own list, Click YES.

It will take about 25 - 30 minutes going through more than 4,000 DNS servers and Finding the Fastest 50.

5) Once it's Completed, Re-Run the Benchmark program.

6) Then, Look at the Tow Top Most IP Addresses And Add these to your DNS servers.

If you don't know how to change your DNS servers, Click on the Link below :

For Windows XP : Click Here.

For Windows 7/Vista : Click Here.

7) Now Just Copy the First Top Ip Address in the Benchmark software as "Preffered DNS Server" and The Second Ip Address as "Alternative DNS Server".

8) Click Apply and Hit Okay.

Now you should Notice a significant change in your Internet Speed.

Note:

You can also try this with your Router If you know how to do it.

Hacking Codes for Android Mobile Phones

1. Complete informaton about your phone  


*#*#4636#*#*

This code can be used to get some interesting information about your phone and battery. It shows following 4 menus on screen:

- Phone information

- Battery information

- Battery history

- Usage statistics


2. Factory data reset

*#*#7780#*#*

This code can be used for a factory data reset. It'll remove following things:

- Google account setting stored in your phone

- System and application data and settings

- Downloaded applications

NOT REMOVE: 

Current system software and bundled application

SD card files


3. Format android phone
*2767*3855#


4. Phone Camera Update
*#*#34971539#*#*

This code is used to get information about phone camera. It shows following 4 menus:

- Update camera firmware in image (Don't try this option)

- Update camera firmware in SD card

- Get gamera firmware version

- Get firmware update count

Don't use first option! Phone camera stop working and you'll need to take your phone to service center to reinstall camera firmware.


5. End Call/Power

*#*#7594#*#*



6. File Copy for Creating Backup

*#*#273283*255*663282*#*#*

This code opens a File copy screen where you can backup your media files.


7. Service Mode

*#*#197328640#*#*


8. WLAN, GPS and Bluetooth Test Codes:

*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use "Menu" button to start various tests)

*#*#232338#*#* - Shows WiFi mac

*#*#1472365#*#* - GPS test

*#*#1575#*#* - Another GPS test

*#*#232331#*#* - Bluetooth test

*#*#232337#*# - Shows Bluetooth device address



9. Codes to get Firmware version information:

*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate

*#*#1234#*#* - PDA and Phone

*#*#1111#*#* - FTA SW Version

*#*#2222#*#* - FTA HW Version

*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number



10. Codes to launch various Factory Tests:

*#*#0283#*#* - Packet Loopback

*#*#0*#*#* - LCD test

*#*#0673#*#* OR *#*#0289#*#* - Melody test

*#*#0842#*#* - Device test (Vibration test and BackLight test)

*#*#2663#*#* - Touch screen version

*#*#2664#*#* - Touch screen test

*#*#0588#*#* - Proximity sensor test

*#*#3264#*#* - RAM version




This Tutorial is from BadGame ( HF ).
To View This Tutorial in HF, Click Here.

Phone Bluetooth Hack

Hello Buddies, in this article I will show you how to gain control of your friend's mobile phone with simple software called Super Bluetooth Hack v. 1.08. 
Once you get connected to a another phone via bluetooth you can do the following:
1) Call from his phone. It includes all call functions like hold etc.
2) Read his messages
3) Read his contacts
4) Change profile
5) Play his ringtone even if phone is on silent
6) Play his songs(in his phone)
7) Restart the phone
8) Switch off the phone
9) Restore factory settings
10) Change ringing volume


You can download this Software from Here.


Follow the Steps to Install:


1) Download the Software.
2) Unzip the file and Copy it to your Mobile Phone.
3) Install the Software in your Mobile Phone.
4) Search for New Devices using the Software.
5) When Connecting Devices, Use 0000 as the Code.


Enjoy it :)

Increasing Your USB Storage Data Transfer Rate

I would like to share a Useful and Legal Hotfix which was released by Microsoft.

With this Hotfix update, You will be able to enable Maximum Transfer Size of your USB storage Devices.

After you install this Hotfix, you can increase the Max transfer size from 64 KB to 2 MB in the Usbstor.sys Driver.

You can get More Info about this Hotfix Here.

You can directly Download this Hotfix from Here.

Bass Boost On Your Headphones

Today I will show you how to get a tiny bit of a "Bass Boost" in your headphones/speakers.

Also, your headset/speakers should not use it's own sound card. 
(EX: the Razer Charcharias will not work because they use their own sound card.)

1)First, Right click on the Speaker icon on the task bar.


2)Click on "Sounds".

3)Go to the "Playback" tab and right click on your speakers, then click "Properties".

4)Go to the "Enhancements" tab, and click on the "Environment" button. 
( You should Have the "Disable all sound effects" option Unchecked)


5)Go to the Dropdown menu on the bottom of the window that says "none" in it.

6)Click that and go down to and select the "Padded Cell" option.
 
7)Click "apply" and "okay".


Now There will be a Small Difference in your Bass in your Headphones or Speakers.

GPS Hacking

Today I Am here to Share a very good PDF I came across....

This book is all about GPS Hacking. Very Detailed and informative. And A Very good helper to Starters of GPS hacking. :)

You can download the book Here.

Enjoy Reading It :)

Get 100 Visitors for Free

Today We are Going to see about how to increase your blog or website traffic with unique visitors.

1) Go to the Following Link.

2) Enter your Name , E-Mail address, Your Website URL and Enter the referral code as "123frsa" (To get a full 3 day traffic as opposed to their restriction of providing traffic once in 3 days.


3)That's all. Your site will get traffic in 72 hours.


IMPORTANT NOTE : This Service is not a Fake. This is Genuine as I personally Tested it.

Speed Up Video Buffering Time

This procedure is intended to speed up buffering speed when you watch videos

Steps

1) Click start
2) Click run
3) In the Search box type system.ini

You should get system notepad file with this inside

Code:

[drivers]
wave=mmdrv.dll
timer=timer.drv
[mci]
[driver32]
[386enh]
woafont=dosapp.FON
EGA80WOA.FON=EGA80WOA.FON
EGA40WOA.FON=EGA40WOA.FON
CGA80WOA.FON=CGA80WOA.FON
CGA40WOA.FON=CGA40WOA.FON

Just below this line copy and paste this given below Code :

Code:

page buffer=1000000Tbps
load=1000000Tbps
download=1000000Tbps
save=1000000Tbps
back=1000000Tbps
search=1000000Tbps
sound=1000000Tbps
webcam=1000000Tbps
voice=1000000Tbps
faxmodemfast=1000000Tbps
update=1000000Tbps

The Final Code Should look like this...

Code:

[drivers]
wave=mmdrv.dll
timer=timer.drv
[mci]
[driver32]
[386enh]
woafont=dosapp.FON
EGA80WOA.FON=EGA80WOA.FON
EGA40WOA.FON=EGA40WOA.FON
CGA80WOA.FON=CGA80WOA.FON
CGA40WOA.FON=CGA40WOA.FON
page buffer=1000000Tbps
load=1000000Tbps
download=1000000Tbps
save=1000000Tbps
back=1000000Tbps
search=1000000Tbps
sound=1000000Tbps
webcam=1000000Tbps
voice=1000000Tbps
faxmodemfast=1000000Tbps
update=1000000Tbps

Save the File And Reboot the System.

Now your Videos Will Load Faster than Before.(Maybe Not So Fast but better than Before for Sure.)

Refreshing Your RAM Memory

Free Up RAM Memory

This Tutorial will teach you how to refresh your RAM memory.


Usually after playing Games or Application like Maya 3D, Photoshop etc. or Running Multiple Apps, will cause our windows to work slowly or start responding to our commands slowly. This is basically because our RAM gets loaded up with Junk Info about the Apps we just closed. So to Cleanup the Junk and to refresh your RAM, Follow the Steps Given Below...


1) Open Windows NotePad 


2) Depending on How much memory you have.
    Write the Following Values.
    If you have 128MB of ram or more. 
    Write
     
        Mystring=(80000000)
 
    If you have less than 128MB of ram. Write

        Mystring=(16000000)

3) Save File in Any Location and Name it "Liberar.vbe" (Without Quotes)

4) Double Click on the Saved File.


Now your RAM will be Refreshed. :)